Integration of thulium silicate for enhanced scalability of HKMG CMOS technology

A very interesting fresher than fresh PhD Thesis from Royal Institute of Technology (KTH), Sweden on the Integration of thulium silicate for enhanced scalability of high-k/metal gate CMOS technology. The ALD processing in this work has been preformed in a  Beneq TFS 200 ALD system - a crossflow-type 200mm hot-wall reactor. The public defense will take place on 27 May 2014 at 10.00 a.m. in Sal D, Forum, Kungliga Tekniska Högskolan, Isafjordsgatan 39, Kista. - Best of luck!

 

Left, the process flow and right a TEM cross-section of the TmSiO/HfO2/TiN gate stack implemented in gate-last MOSFETs. (From the thesis below)

Integration of thulium silicate for enhanced scalability of high-k/metal gate CMOS technology
EUGENIO DENTONI LITTA
Doctoral Thesis in Information and Communication Technology, Stockholm, Sweden 2014

Abstract: High-k/metal gate stacks have been introduced in CMOS technology during the last decade in order to sustain continued device scaling and ever improving circuit performance. Starting from the 45nm technology node, the stringent requirements in terms of equivalent oxide thickness and gate current density have rendered the replacement of the conventional SiON/poly-Si stack unavoidable. Although Hf-based technology has become the de facto industry standard for high-k/metal gate MOSFETs, problematic long-term scalability has motivated the research of novel materials and solutions to fulfill the target performances expected of gate stacks in future technology nodes. In this work, integration of a high-k interfacial layer has been identified as the most promising approach to improve gate dielectric scalability, since this technology presents the advantage of potential compatibility with both current Hf-based and plausible future higher-k materials. Thulium silicate has been selected as candidate material for integration as interfacial layer, thanks to its unique properties which enabled the development of a straightforward integration process achieving well-controlled and repeatable growth in the sub-nm thickness regime, a contribution of (0.25 ± 0.15)nm to the total EOT, and high quality of the interface with Si. Compatibility with industry-standard CMOS integration flows has been kept as a top priority in the development of the new technology. To this aim, a novel ALD process has been developed and characterized, and a manufacturable process flow for integration of thulium silicate in a generic gate stack has been designed. The thulium silicate interfacial layer technology has been verified to be compatible with standard integration flows, and fabrication of high-k/metal gate MOSFETs with excellent electrical characteristics has been demonstrated. The possibility to achieve high performance devices by integration of thulium silicate in current Hf-based technology has been specifically demonstrated, and the TmSiO/HfO2 dielectric stack has been shown to be compatible with the industrial requirements of operation in the sub-nm EOT range (down to 0.6nm), reliable device operation over a 10 year expected lifetime, and compatibility with common threshold voltage control techniques. The thulium silicate interfacial layer technology has been especially demonstrated to be superior to conventional chemical oxidation in terms of channel mobility at sub-nm EOT, since the TmSiO/HfO2 dielectric stack achieved 20% higher electron and hole mobility compared to state-of-the-art SiOx/HfO2 devices at the same EOT. Such performance enhancement can provide a strong advantage in the EOT-mobility trade-off which is commonly observed in scaled gate stacks, and has been linked by temperature and stress analyses to the higher physical thickness of the high-k interfacial layer, which results in attenuated remote phonon scattering compared to a SiOx interfacial layer achieving the same EOT.